Tie the bowline, taut-line hitch, and trucker’s hitch
- Form a bowline loop, pass the working end up through the loop, around the standing part, and back down through the loop.
- Dress and set the bowline, leaving its loop fixed around the anchor.
- For a taut-line hitch, wrap toward the anchor twice around the standing part and make one outside turn.
- For a trucker’s hitch, form a fixed loop partway along the line, pass the working end around the far anchor, and bring it back through the loop.
- Pull the trucker’s hitch tight and finish with two half hitches, then load and inspect all three knots.
The standard. Pass: the bowline stays a fixed loop, the taut-line slides only when deliberately adjusted, and the trucker’s hitch holds tension with two half hitches. Fail: a loop capsizes, a hitch creeps under a gentle load, or the tail is lost in the knot.
Safety box. Never use these camp knots for climbing, rescue, suspension, or fall arrest. Keep hands clear while tensioning. Do not burn cord ends near a tarp, tent, fuel, or dry leaf litter. Cut cord away from your body, and keep the knife sheathed when it is not in your hand. Do not stand on poles that rest on the ground, because they can roll. A tight line can fail suddenly. Lower the structure before retightening a shifting joint.